Perfect 3430mm scale glider – E-DG600
DG 600 is one of RCRCM hot-selling RC Gliders, It is designed structural to withstand the stress of aerobatics maneuvers and has an advantage at air shows .
DG 600 is a nice sized model and makes for a perfect first time scale ship. It also flies well on marginal lift with its HQ airfoil. These airfoils offer speed and quick response; it will hold the energy from a dive through all types of soaring aerobatics. To get it in the air, most will slope or aerotow, but with its low weight it can be launched from competition style winches or HD hi-starts.
As with all our scale models, DG 600 is a full molded, high quality airframe that will only require few hours of "building" to get it ready to fly. The wing features a strong carbon spar, molded wing tips and of course the high gloss painted in mold finish. The tail surfaces are hollow molded just as the wing and are removable with screws.
Available in 4 Versions:
Fiberglass+Carbon Standard Version: Standard hollow molded fiberglass construction reinforced with carbon fiber which gives good stiffness and torsion stability with lower weight and cost. Highly recommended for sport flying.
Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability.
The first two versions are available in stock. We also can produce two custom versions; Light Carbon Version (less weight) and Double Carbon Version (with two layers of carbon).
- A molded, high quality airframe that will only require few hours of "building" to get it ready to fly
- Control Surfaces: Rudder, Elevator, Ailerons and Flaps
- Two-piece hollow molded composite Carbon Fiber or Glass wing design
- Carbon Fiber reinforced wing with square wing joiner
- RCRCM 3430mm Wingspan Glider – E- DG600
- Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate
Wing area: 44.5dm²
Flying weight: N/A
Empty Weight: Fiberglass+Carbon Standard Version:1370g
Carbon Version: 1470g
CG: 65 mm from leading edge
Tow hook setting NO
Required Radio No less than 6 channels
Recommend equipment configuration for a motorless version Basic configuration
Servos for wings KST DS125MG*4(or similar torque servo)
Servos for fuselage KST DS215MG*1 KST DS113MG*1(or similar torque servo)
Required Battery 4S 14.8V 2200-3300mah 25c
Power System LC4250 KV800-1000
Motor Mount Dia. 38mm
Electronic Speed Control SkyWalker-60A
Fairing size 40mm
Paint Scheme is also available in a wide range of colors, besides standard color scheme presents on this website and can also include some other color schemes.
Another important thing about the surface of the glider: this RCRCM glider is fully moulded. Mould precision ensures that each glider has a complete aerodynamic layout but in the process of composite production, there is a slight chance of very tiny air bubbles or slight cloth grain. In the unlikely event that these small imperfections exist, they do not affect the structural strength or flight performance.
Glider long term storage: Hang glider vertically to reduce the stress on the glider surfaces to avoid deformation that could adversely affect flight performance and trim.