2000mm Wingspan RCRCM RC Glider – Angela
Superb flying wing - Angela is fully molded with composite material, it has good performance in slope soaring. Angela is equipped with ailerons, flaps and rudder. It looks like a “pterodactyl” when flying in the sky!
Available in 3 Versions:
Carbon Version: Wings built using carbon cloth as well as fuselage reinforced with carbon from leading edge of the wing to the tail. This configuration gives the model enormous stiffness and torsion stability.
The first two versions are available in stock. We also can produce two custom versions; Light Carbon Version (less weight) and Double Carbon Version (with two layers of carbon).
- Completely new special design.
- Friendly Flying Characteristics
- Top Quality finish
- Easy Handling
- 2000mm Wingspan
- 2000mm Wingspan RCRCM RC Glider
- Ballast Tube(for Motorless Glider only) , Motor mount(for electric version only), servo support, Push Rod, Clevis, Linkage Rod, Control horn, Servo Cover, Wing joiner, tail joiner, servo plate
E-ANGELA WING SPECIFICATIONS:
Wing area: 35dm2
Flying Weight: N/A
Empty Weight: Fiberglass+Carbon Standard Version:730g
Carbon Version: 840g
CG: 65-68 mm from leading edge
Tow hook setting NO
Required Radio No less than 6 channels
Recommend equipment configuration for an electric version
Servos for wings KST DS135MG*4(or similar torque servo)
Servos for fuselage KST DS245H*1(or similar torque servo)
Required Battery 3S 11.1V 1500mah 25c
Power System LC2835-7T kv1160
Motor Mount Dia.:(mm) 35mm
Electronic Speed Control SkyWalker-40A
Fairing size:(mm) 38mm
Ailerons: +/- 10mm
Elevator: AL+FLP +/-8mm
Butterfly: AL 8mm UP, FLP 25mm DOWN
Neutral: AL+FLP 2mm UP
Paint Scheme is also available in a wide range of colors, besides standard color scheme presents on this website and can also include some other color schemes.
Another important thing about the surface of the glider: this RCRCM glider is fully moulded. Mould precision ensures that each glider has a complete aerodynamic layout but in the process of composite production, there is a slight chance of very tiny air bubbles or slight cloth grain. In the unlikely event that these small imperfections exist, they do not affect the structural strength or flight performance.
Glider long term storage: Hang glider vertically to reduce the stress on the glider surfaces to avoid deformation that could adversely affect flight performance and trim.