Servo
HS-56HB:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.12sec/60° at no load
Operating Speed (6.0V): 0.10sec/60° at no load
Stall Torque (4.8V): 14 oz/in. (1kg.cm)
Stall Torque (6.0V): 16 oz/in. (1.2kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
Dead Band Width: 4usec
Motor Type: 3-Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing
Gear Type: Karbonite Gears
Connector Wire Length: 11.81″ (300mm)
Dimensions: 88″ x 0.45″x 94″ (23 x 12 x 24mm)
Weight: .37oz. (10.7g)
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.12sec/60° at no load
Operating Speed (6.0V): 0.10sec/60° at no load
Stall Torque (4.8V): 14 oz/in. (1kg.cm)
Stall Torque (6.0V): 16 oz/in. (1.2kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
Dead Band Width: 4usec
Motor Type: 3-Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Top Ball Bearing
Gear Type: Karbonite Gears
Connector Wire Length: 11.81″ (300mm)
Dimensions: 88″ x 0.45″x 94″ (23 x 12 x 24mm)
Weight: .37oz. (10.7g)
HS-85MG:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.16sec/60° at no load
Operating Speed (6.0V): 0.14sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 240mA no load operating
Current Drain (6.0V): 8.6mA/idle and 260mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: Single Ball Bearing
Gear Type: 4 Metal and 1 Nylon
Connector Wire Length: 6.29″ (160mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (29 x 13 x 30mm)
Weight: 0.80oz (22.9g)
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.16sec/60° at no load
Operating Speed (6.0V): 0.14sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 8mA/idle and 240mA no load operating
Current Drain (6.0V): 8.6mA/idle and 260mA no load operating
Dead Band Width: 8usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: Single Ball Bearing
Gear Type: 4 Metal and 1 Nylon
Connector Wire Length: 6.29″ (160mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (29 x 13 x 30mm)
Weight: 0.80oz (22.9g)
HS-125MG:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.17sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 7.4mA/idle and 180mA no load operating
Current Drain (6.0V): 7.7mA/idle and 230mA no load operating
Dead Band Width: 5usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Direct Drive
Bearing Type: Dual Ball Bearing
Gear Type: 4 Metal Gears, 1 Metal Resin Gear
Connector Wire Length: 11.81″ (300mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (30 x 10 x 34mm)
Weight: 0.84oz (24g)
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.17sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 7.4mA/idle and 180mA no load operating
Current Drain (6.0V): 7.7mA/idle and 230mA no load operating
Dead Band Width: 5usec
Motor Type: 3 Pole Ferrite Motor
Potentiometer Drive: Direct Drive
Bearing Type: Dual Ball Bearing
Gear Type: 4 Metal Gears, 1 Metal Resin Gear
Connector Wire Length: 11.81″ (300mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (30 x 10 x 34mm)
Weight: 0.84oz (24g)
HS-5125MG:
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.17sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Standing Torque (4.8V): 83.32 oz/in. (6kg.cm)
Standing Torque (6.0V): 97.21 oz/in. (7kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 180mA no load operating
Current Drain (6.0V): 3mA/idle and 230mA no load operating
Dead Band Width: 1usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: Dual Ball Bearing
Gear Type: 4 Metal Gears, 1 Metal Resin Gear
Connector Wire Length: 11.81″ (300mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (30 x 10 x 34mm)
Weight: 0.84oz (24g)
HS-5056MG:
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.17sec/60° at no load
Operating Speed (6.0V): 0.13sec/60° at no load
Stall Torque (4.8V): 41.66 oz/in. (3kg.cm)
Stall Torque (6.0V): 48.6 oz/in. (3.5kg.cm)
Standing Torque (4.8V): 83.32 oz/in. (6kg.cm)
Standing Torque (6.0V): 97.21 oz/in. (7kg.cm)
Operating Angle: 40 Deg. one side pulse traveling 400usec
360 Modifiable: No
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 3mA/idle and 180mA no load operating
Current Drain (6.0V): 3mA/idle and 230mA no load operating
Dead Band Width: 1usec
Motor Type: 3 Pole Ferrite
Potentiometer Drive: Direct Drive
Bearing Type: Dual Ball Bearing
Gear Type: 4 Metal Gears, 1 Metal Resin Gear
Connector Wire Length: 11.81″ (300mm)
Dimensions: 1.14″ x 0.51″x 1.18″ (30 x 10 x 34mm)
Weight: 0.84oz (24g)
HS-5056MG:
Motor Type: 3-pole
Bearing Type: Single BB
Speed: 0.12 / 0.10 sec @ 60 deg.
Torque: 13.88 / 16.66 oz.in
Size: 0.88″ x 0.45″ x 0.94″
Weight: 0.37oz - 10.00g
HS-5085MG:
Bearing Type: Single BB
Speed: 0.12 / 0.10 sec @ 60 deg.
Torque: 13.88 / 16.66 oz.in
Size: 0.88″ x 0.45″ x 0.94″
Weight: 0.37oz - 10.00g
HS-5085MG:
Technische Daten:
Abmessungen: 29×13x30 mm
Stellgeschwindigkeit bei 4.8/6V: 0.16/0.14 sec/60°
Drehmoment bei 4.8/6V: 3.6/4.3 kg/cm
Abmessungen: 29×13x30 mm
Stellgeschwindigkeit bei 4.8/6V: 0.16/0.14 sec/60°
Drehmoment bei 4.8/6V: 3.6/4.3 kg/cm
VS-12M:
Operating Voltage: 4.8-6.0V
Stall Torque: (21.0oz.in)
Operating Speed: 0.14sec/60deg
Weight: 8.0g(.28oz)
Size: 25×8.7×21.6mm (.98x.34x.85in)
Operation figures are based on 4.8v
Stall Torque: (21.0oz.in)
Operating Speed: 0.14sec/60deg
Weight: 8.0g(.28oz)
Size: 25×8.7×21.6mm (.98x.34x.85in)
Operation figures are based on 4.8v
